Stainless steel nozzles? | Ultimaker: 3D Printers

ian: I have not seen any 3rd party nozzles / print cores for the UM3 yet, so there is no place to get abrasion resistant nozzles for the UM3 at the moment. As a side track, Stainless Steel nozzles are really not desirable, they do wear and you have to lower your print speed and up your temperature since …

Amazon.com: E3D v6 Extra Nozzle – Stainless Steel – 1.75mm x 0.40 …

E3D nozzle in stainless steel! These E3D nozzles are available in 0.25mm, 0.40 mm, and 0.80mm sizes; Try one of each today and customize every print! Stainless steel allows the nozzle to perform prints with even more accuracy, plus, it is less resistant to wear and tear over long periods of time …

3D Printer Stainless Steel nozzle for a E3D V6 Extruder – Hobbyking

3D Printer Stainless Steel nozzle for a E3D V6 Extruder. Replace your brass 3D printing nozzle with this 303 stainless steel nozzle designed for when you print with specialized filaments like carbon, wood, steel and aluminum.

V6 Extra Nozzle – Stainless Steel – E3D

Issues Using Stainless Steel Nozzle – RepRap Forums

Because I plan on printing with filled filaments soon, I decided to go to ebay and get some cheap stainless steel nozzles for my hotend in order to reduce wear. I figured they could also be used for normal plastics as well, mainly so I don’t need to swap nozzles all the time. I tested out the extru.

Stainless Steel nozzle – Prusa Research – official support forum

For that project we have opted to print the pieces with Antibacterial PLA with a Stainless Steel nozzle to guarantee the best conditions for the treatment. I’ve changed the nozzle without problems, and then recalibrated (XYZ), but all my prints with the SS nozzle have a terrible lack of layer adhesion, to the …

E3D v6 .25MM Stainless Steel nozzle review – YouTube

Today we are taking a look at the new E3D nozzle that I got for my 3D printer.Hope you find …

CleanTip Stainless Steel Nozzle – 1.75mm x 0.25mm | MatterHackers

Our new CleanTip™ Nozzles are the solution. Coated with ultralow friction Tungsten Disulfide (WS2), no filament sticks to our stainless steel nozzles. Tungsten Disulfide is a really cool material. It has even less friction than PTFE and is heat resistant up to 650°C. These photos show an uncoated stainless steel nozzle (left) …

CleanTip Stainless Steel Nozzle – 1.75mm x 0.40mm | MatterHackers

MatterHackers CleanTip™ Nozzles are coated with ultralow friction Tungsten Disulfide for less jams, easier cleaning, and printing with metal powder and carbon fiber filaments. Manufactured in the USA. Note: Compatible with E3D v6 and Hexagon hot ends such as the Robo R1. Not compatible with all hot ends.